Macro lenses are expensive. This probably explains the popularity of low-cost alternatives like extension tubes and macro filters. I’ve been using Kenko extension tubes for quite a while. And while it’s a cheap way to get into the world of macro photography, it’s not the most practical one. Constantly adding and removing tubes quickly becomes a nuisance, especially if you are shooting on location. The Raynox DCR-250 macro conversion lens is not only a cheaper alternative to extension tubes, it’s also a much more practical one. It comes with a snap-on adapter which you can use to fit the Raynox DCR-250 on virtually any lens. Before I splashed out on a proper macro lens, I’ve been using DCR-250 for several years, and I can’t praise it enough.
In fact, even though I’m now the proud owner of a Tamron AF 90mm f/2.8 Di SP macro lens, I still find the Nikon 50mm f/1.8 D AF Nikkor Lens and Raynox DCR-250 combo quite handy. It’s significantly smaller and lighter than the Tamron lens, and it produces excellent results. Don’t take my word for it, and take a look at the sample photo below. This is a macro shot of my Tamron lens taken with the Nikkor 50mm/Raynox DCR-250 combo.
So whether you are getting starting with macro photography and you can’t justify buying a proper macro lens, or if you are looking for a lighter and more portable alternative, the described setup is a good solution, indeed. You might wonder why use Raynox DCR-250 with precisely the 50mm lens. For starters, this is one of the most versatile lenses out there, and it’s also one of the cheapest. Its lightweight and compact design makes the lens a perfect travel companion. In addition to that, the lens features an aperture ring, so you can adjust f-stops manually. This means that the lens is suited for use with a reverse ring macro adapter.
Buy from Amazon: